Kizashi

Technical identity summary

Source variant count: 1 · Status: ACTIVE_USED

This page does not treat the same sales name as one vehicle across all years and markets. Rows below remain separated by source region and variant identity.

Kizashi · Japan

Where should diagnosis start?

• Separate CVT, D-CVT and e-CVT technically; fluid, clutch, motor-generator and hydraulic architectures differ.
• For AWD/4x4 variants, verify transfer/differential, tire circumference and torque distribution control separately.

Exact OEM torque, pressure, capacity, pin or calibration values are not inferred from this normalized identity record; a verified service source is required for the exact vehicle application.

System architecture: what does this record indicate?

• CVT belt/chain-pulley architecture is not conflated with e-CVT planetary/motor-generator architecture.
• In AWD/4x4, tire circumference, transfer/differential, wheel speeds and torque-distribution request are kept as separate mechanical/electronic evidence.

Freeze-frame and live-data package

• Freeze frame: first/last fault time, RPM, load, vehicle speed, system voltage, core temperatures and companion DTCs.
• Driveline: input/output speeds, commanded/actual ratio, clutch/TCC slip, fluid temperature, actuator/solenoid command and adaptations.
• Chassis/traction: four wheel speeds, steering angle, yaw/acceleration and AWD torque request/feedback on the same time base.

Measurement sequence

1. 1) Match vehicle/generation/market/powertrain/driveline identity to the source record; family name alone is not fitment evidence.
2. 2) Preserve freeze frame and companion DTCs before clearing; make the first-fault condition reproducible.
3. 3) Verify power/ground and network communication under load; do not decide from key-on static measurement alone.
4. 5) Compare electronic command → hydraulic/actuator response → mechanical slip/ratio result at the same temperature and load.
5. 6) After repair, recreate the same load/temperature and verify DTC state, live-data deviation and user symptom together.

Root-cause discrimination matrix

• For CVT ratio faults, identify the architecture first; e-CVT motor-generator power split and belt/chain CVT hydraulic-pulley faults do not share the same diagnostic tree.
• For AWD binding/warning complaints, exclude tire-circumference or wheel-speed mismatch before condemning transfer/differential hardware.

Connected technical centers

Engine Atlas · Transmission Atlas · DTC Academy · Recall

Market and generation variants

Kizashi · Japan · 2009–2016