OtoDünyam
DEEP TECHNICAL CONTENT

How to Find an Engine Code

How to Find an Engine Code: Electric-drive mechanical power follows P = T × ω from torque and angular speed. The page also includes a worked example and measurement sequence.

6 concrete technical facts1 worked example2 sources

Technical frame

How to Find an Engine Code: Electric-drive mechanical power follows P = T × ω from torque and angular speed. The page also includes a worked example and measurement sequence.

The technical values here expose the standard, protocol or physical relationship directly; model-specific service values are linked through the matching model/variant dossier.

The goal is not only to define the term but to let the reader calculate and interpret what the data means in a scan, scope or physical test.

Concrete technical facts

  • Electric-drive mechanical power follows P = T × ω from torque and angular speed.
  • A three-phase inverter converts DC-link energy into controlled phase currents; current-sensor offset directly distorts torque estimation.
  • A PMSM can use resolver/encoder rotor position, and sin/cos amplitude/offset/phase errors affect commutation and torque.
  • An induction motor induces rotor current and torque relates to slip, while a PMSM rotor carries a permanent-magnet field.
  • Inverter diagnosis correlates DC-link voltage, phase currents, rotor position, temperature and isolation/contactor state.
  • Electrical power can be estimated by V×I on DC, while three-phase AC, inverter efficiency and power factor require additional terms.

Worked example

  • Mechanical-power example: at 200 Nm and 3000 rpm, ω=3000×2π/60≈314 rad/s, so P≈200×314=62.8 kW.

Measurement and verification sequence

  • Record DC-link voltage and ripple.
  • Check three phase currents and sensor zero offset.
  • Compare resolver/position sin-cos signals with a scope.
  • Correlate commanded torque with actual current/torque response.

Fault-separation logic

  • Is a valid command present and are power/ground/network healthy?
  • Does feedback follow the command?
  • Does an independent physical measurement confirm the output?
  • Is the fault limited to a specific temperature/load/speed condition?
  • Does the result remain stable when the original condition is repeated after repair?

Technical sources

  1. Otodünyam Technical Editorial Dictionary R3
  2. ISO standards catalogue · road vehicles

Continue investigating

Model-specific real technical data · Measurement references · Technical diagnostic atlas