OTODÜNYAMAUTOMOTIVE KNOWLEDGE CENTER
What is the fuel capacity of BMW Motorrad R 12 G/S OEM standard specification?
4.1 gal
The cited OEM source lists Usable fuel tank for BMW Motorrad R 12 G/S OEM standard specification as 4.1 gal.
SOURCED MODEL TECHNICAL DATA
BMW Motorrad R 12 G/S OEM standard specification Oil, Fluid Capacities & Technical Data
BMW Motorrad R 12 G/S OEM standard specification — Usable fuel tank: 4.1 gal · Engine displacement: 1170 cc · Engine power: 109 hp Sources, symptoms, measurements and verification on one page.
Quick answers
What is the engine displacement of BMW Motorrad R 12 G/S OEM standard specification?
1170 cc
The cited OEM source lists Engine displacement for BMW Motorrad R 12 G/S OEM standard specification as 1170 cc.
What is the power rating of BMW Motorrad R 12 G/S OEM standard specification?
109 hp
The cited OEM source lists Engine power for BMW Motorrad R 12 G/S OEM standard specification as 109 hp.
What is the power rating of BMW Motorrad R 12 G/S OEM standard specification?
7000 rpm
The cited OEM source lists Power rpm for BMW Motorrad R 12 G/S OEM standard specification as 7000 rpm.
What is the torque rating of BMW Motorrad R 12 G/S OEM standard specification?
85 lb-ft
The cited OEM source lists Maximum torque for BMW Motorrad R 12 G/S OEM standard specification as 85 lb-ft.
What is the torque rating of BMW Motorrad R 12 G/S OEM standard specification?
6500 rpm
The cited OEM source lists Torque rpm for BMW Motorrad R 12 G/S OEM standard specification as 6500 rpm.
What is the Alternator value for BMW Motorrad R 12 G/S OEM standard specification?
660 W
The cited OEM source lists Alternator for BMW Motorrad R 12 G/S OEM standard specification as 660 W.
What is the battery capacity of BMW Motorrad R 12 G/S OEM standard specification?
12 Ah
The cited OEM source lists Battery capacity for BMW Motorrad R 12 G/S OEM standard specification as 12 Ah.
Quick technical specification
Engine displacement
1170 cc
Engine power
109 hp
Power rpm
7000 rpm
Maximum torque
85 lb-ft
Torque rpm
6500 rpm
Alternator
660 W
Battery capacity
12 Ah
Oil, fluids, energy and capacities
Usable fuel tank
4.1 gal
Expected values / measurement references
Engine displacement
1170 cc
Engine power
109 hp
Power rpm
7000 rpm
Maximum torque
85 lb-ft
Torque rpm
6500 rpm
Alternator
660 W
Battery capacity
12 Ah
Usable fuel tank
4.1 gal
Model-specific OEM reference checks
R 12 G/S OEM standard specification: published Engine displacement reference is 1170 cc. Measurements on the same variant/year scope should use this value as the reference.
R 12 G/S OEM standard specification: published Engine power reference is 109 hp. Measurements on the same variant/year scope should use this value as the reference.
R 12 G/S OEM standard specification: published Power rpm reference is 7000 rpm. Measurements on the same variant/year scope should use this value as the reference.
R 12 G/S OEM standard specification: published Maximum torque reference is 85 lb-ft. Measurements on the same variant/year scope should use this value as the reference.
R 12 G/S OEM standard specification: published Torque rpm reference is 6500 rpm. Measurements on the same variant/year scope should use this value as the reference.
R 12 G/S OEM standard specification: published Alternator reference is 660 W. Measurements on the same variant/year scope should use this value as the reference.
Diagnostic entry symptoms
Interrupted or inconsistent throttle response
Unstable idle or misfire
ABS/DTC warning
Starting or charging problem
Measurement and test approach
Measure battery resting voltage and cranking voltage, then charging voltage at multiple engine speeds.
Record requested/actual throttle position, lambda and manifold pressure during the same acceleration event.
Compare ABS wheel-speed signals from low speed upward.
Root-cause discrimination
Separate fuel/ignition faults from ride-by-wire torque limitation.
For ABS/DTC warnings, separate wheel-sensor gap/signal faults from IMU/ECU communication faults.
DTC / SPN / FMI context
Preserve manufacturer DTCs, freeze-frame and ABS/IMU subcodes together.
Post-repair verification
Repeat cold/hot starts, idle, medium load and a controlled braking cycle; warnings must not return.
Electrical and network
12 V charging system, engine ECU, ABS/IMU and ride-by-wire/riding-mode signals are evaluated together.
Sensors, actuators and observation points
R 12 G/S OEM standard specification: Throttle position and requested torque.
R 12 G/S OEM standard specification: Lambda, intake pressure and coolant temperature.
R 12 G/S OEM standard specification: Wheel speed, IMU and ABS intervention.
R 12 G/S OEM standard specification: Charging voltage and battery state.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.