OTODÜNYAMAUTOMOTIVE KNOWLEDGE CENTER
What is the fuel capacity of Caterpillar M320 Wheel Excavator?
470 L
The cited OEM source lists Fuel for Caterpillar M320 Wheel Excavator as 470 L.
SOURCED MODEL TECHNICAL DATA
Caterpillar M320 Wheel Excavator Oil, Fluid Capacities & Technical Data
Caterpillar M320 Wheel Excavator — Fuel: 470 L · DEF: 30 L · Cooling: 31.7 L Sources, symptoms, measurements and verification on one page.
Quick answers
What is the DEF / AdBlue capacity of Caterpillar M320 Wheel Excavator?
30 L
The cited OEM source lists DEF for Caterpillar M320 Wheel Excavator as 30 L.
What is the coolant capacity of Caterpillar M320 Wheel Excavator?
31.7 L
The cited OEM source lists Cooling for Caterpillar M320 Wheel Excavator as 31.7 L.
What is the hydraulic capacity or reference value for Caterpillar M320 Wheel Excavator?
155 L
The cited OEM source lists Hydraulic tank for Caterpillar M320 Wheel Excavator as 155 L.
What is the hydraulic capacity or reference value for Caterpillar M320 Wheel Excavator?
270 L
The cited OEM source lists Hydraulic system for Caterpillar M320 Wheel Excavator as 270 L.
What is the Swing speed value for Caterpillar M320 Wheel Excavator?
9.2 rpm
The cited OEM source lists Swing speed for Caterpillar M320 Wheel Excavator as 9.2 rpm.
What is the torque rating of Caterpillar M320 Wheel Excavator?
52.5 kNm
The cited OEM source lists Swing torque for Caterpillar M320 Wheel Excavator as 52.5 kNm.
What is the fuel capacity of Caterpillar M320 Wheel Excavator?
470 L
The cited OEM source lists Fuel capacity for Caterpillar M320 Wheel Excavator as 470 L.
Quick technical specification
Swing speed
9.2 rpm
Swing torque
52.5 kNm
Fuel capacity
470 L
DEF capacity
30 L
Cooling system
31.7 L
Hydraulic tank
155 L
Hydraulic system
270 L
Oil, fluids, energy and capacities
Fuel
470 L
DEF
30 L
Cooling
31.7 L
Hydraulic tank
155 L
Hydraulic system
270 L
Expected values / measurement references
Swing speed
9.2 rpm
Swing torque
52.5 kNm
Fuel capacity
470 L
DEF capacity
30 L
Cooling system
31.7 L
Hydraulic tank
155 L
Hydraulic system
270 L
Fuel
470 L
Model-specific OEM reference checks
M320 Wheel Excavator: published Swing speed reference is 9.2 rpm. Measurements on the same variant/year scope should use this value as the reference.
M320 Wheel Excavator: published Swing torque reference is 52.5 kNm. Measurements on the same variant/year scope should use this value as the reference.
M320 Wheel Excavator: published Fuel capacity reference is 470 L. Measurements on the same variant/year scope should use this value as the reference.
M320 Wheel Excavator: published DEF capacity reference is 30 L. Measurements on the same variant/year scope should use this value as the reference.
M320 Wheel Excavator: published Cooling system reference is 31.7 L. Measurements on the same variant/year scope should use this value as the reference.
M320 Wheel Excavator: published Hydraulic tank reference is 155 L. Measurements on the same variant/year scope should use this value as the reference.
Diagnostic entry symptoms
Slow or weak hydraulic functions
Engine bog or derate while operating implements
Uneven travel or swing performance
Hydraulic overheating
Measurement and test approach
Measure main implement relief pressure at the specified test port using the manufacturer procedure.
Compare pump flow with engine speed under the same hydraulic load.
Record pilot/command signal together with spool or actuator response.
Root-cause discrimination
Separate pump deficiency, relief leakage, valve internal leakage and cylinder/motor internal leakage with dedicated tests.
Separate engine torque limitation from true hydraulic overload using the same event record.
DTC / SPN / FMI context
Preserve machine event codes, J1939 SPN/FMI and implement-controller diagnostic codes with the same timestamp.
Post-repair verification
At hydraulic-oil operating temperature, cycle time, pressure and flow must return to reference behaviour and no new event should appear.
Electrical and network
24 V machine electrical system, engine ECM, machine ECM, implement controller and CAN/J1939 are evaluated together.
Sensors, actuators and observation points
M320 Wheel Excavator: Main-pump pressure and displacement/command.
M320 Wheel Excavator: Pilot pressure and implement command.
M320 Wheel Excavator: Engine speed/load and torque limit.
M320 Wheel Excavator: Hydraulic-oil temperature and filter restriction.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.