OTODÜNYAMAUTOMOTIVE KNOWLEDGE CENTER
What is the fuel capacity of Polaris RZR XP 4 1000 Current specification?
36 L
The cited OEM source lists Fuel capacity for Polaris RZR XP 4 1000 Current specification as 36 L.
SOURCED MODEL TECHNICAL DATA
Polaris RZR XP 4 1000 Current specification Oil, Fluid Capacities & Technical Data
Polaris RZR XP 4 1000 Current specification — Fuel capacity: 36 L · Engine oil capacity: 2.4 L · Coolant capacity: 5.75 L Sources, symptoms, measurements and verification on one page.
Quick answers
How much engine oil does Polaris RZR XP 4 1000 Current specification take?
2.4 L
The cited OEM source lists Engine oil capacity for Polaris RZR XP 4 1000 Current specification as 2.4 L.
What is the coolant capacity of Polaris RZR XP 4 1000 Current specification?
5.75 L
The cited OEM source lists Coolant capacity for Polaris RZR XP 4 1000 Current specification as 5.75 L.
What is the Demand Drive fluid capacity value for Polaris RZR XP 4 1000 Current specification?
300-350 ml
The cited OEM source lists Demand Drive fluid capacity for Polaris RZR XP 4 1000 Current specification as 300-350 ml.
What is the Transmission oil capacity value for Polaris RZR XP 4 1000 Current specification?
1.65 L
The cited OEM source lists Transmission oil capacity for Polaris RZR XP 4 1000 Current specification as 1.65 L.
What is the power rating of Polaris RZR XP 4 1000 Current specification?
114 hp
The cited OEM source lists Power for Polaris RZR XP 4 1000 Current specification as 114 hp.
What is the engine displacement of Polaris RZR XP 4 1000 Current specification?
999 cc
The cited OEM source lists Engine displacement for Polaris RZR XP 4 1000 Current specification as 999 cc.
What is the Bore value for Polaris RZR XP 4 1000 Current specification?
93 mm
The cited OEM source lists Bore for Polaris RZR XP 4 1000 Current specification as 93 mm.
Quick technical specification
Power
114 hp
Engine displacement
999 cc
Bore
93 mm
Stroke
73.5 mm
Charging system
660 W @ 3000 rpm
Compression ratio
12.5 :1
Front suspension travel
40.6 cm
Rear suspension travel
45.7 cm
Payload
408 kg
Wheelbase
297.2 cm
Ground clearance
35.56 cm
Front tire pressure
131 kPa
Rear tire pressure
137 kPa
Oil, fluids, energy and capacities
Fuel capacity
36 L
Engine oil capacity
2.4 L
Coolant capacity
5.75 L
Demand Drive fluid capacity
300-350 ml
Transmission oil capacity
1.65 L
Expected values / measurement references
Power
114 hp
Engine displacement
999 cc
Model-specific OEM reference checks
RZR XP 4 1000 Current specification: OEM-published Power reference is 114 hp. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
RZR XP 4 1000 Current specification: OEM-published Engine displacement reference is 999 cc. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
RZR XP 4 1000 Current specification: OEM-published Bore reference is 93 mm. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
RZR XP 4 1000 Current specification: OEM-published Stroke reference is 73.5 mm. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
Diagnostic entry symptoms
CVT/PVT belt slip, traction loss or excessive rpm
Overheating or cooling-fan engagement issue
AWD/demand-drive engagement issue or engine fault code
Measurement and test approach
Compare engine-oil, coolant, demand-drive and transmission-fluid levels with model capacities; incorrect levels can mimic PVT/gearcase complaints.
Log engine RPM, throttle, coolant temperature, AWD command and error-code freeze data at the event.
Root-cause discrimination
Separate PVT belt wear from engine power loss by correlating engine rpm with vehicle acceleration and inspecting belt/clutch condition.
DTC / SPN / FMI context
Preserve display fault code with sub-code/event condition; eliminate low-supply-voltage induced multiple faults first.
Post-repair verification
Verify cold/hot operation, 2WD/AWD transitions, low/high-speed PVT cycles and fan engagement.
Maintenance / service reference
RZR XP 4 1000: exact maintenance interval, fluid-change quantity and torque procedure must be verified from OEM maintenance/service information matched to model year/VIN/serial number; unpublished service thresholds are not invented in this record.
Electrical and network
RZR XP 4 1000: Evaluate engine ECU, AWD/demand-drive, cluster and charging network together.
Sensors, actuators and observation points
RZR XP 4 1000: TPS and engine rpm.
RZR XP 4 1000: Coolant temperature/fan command.
RZR XP 4 1000: AWD/demand-drive command.
RZR XP 4 1000: PVT/CVT speed relationship.
RZR XP 4 1000: Battery/charging system.
RZR XP 4 1000: Gear/gearcase position inputs.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.