OTODÜNYAMAUTOMOTIVE KNOWLEDGE CENTER
What is the Load capacity value for Toyota Material Handling 8FBEH18U 3-Wheel Electric?
3500 lb
The cited OEM source lists Load capacity for Toyota Material Handling 8FBEH18U 3-Wheel Electric as 3500 lb.
SOURCED MODEL TECHNICAL DATA
Toyota Material Handling 8FBEH18U 3-Wheel Electric Technical Specs, Power/Torque & Measurements
Toyota Material Handling 8FBEH18U 3-Wheel Electric — Load capacity: 3500 lb · Full-load travel speed: 9.9-10.2 mph · Full-load lift speed: 71-89 fpm Sources, symptoms, measurements and verification on one page.
Quick answers
What is the Full-load travel speed value for Toyota Material Handling 8FBEH18U 3-Wheel Electric?
9.9-10.2 mph
The cited OEM source lists Full-load travel speed for Toyota Material Handling 8FBEH18U 3-Wheel Electric as 9.9-10.2 mph.
What is the Full-load lift speed value for Toyota Material Handling 8FBEH18U 3-Wheel Electric?
71-89 fpm
The cited OEM source lists Full-load lift speed for Toyota Material Handling 8FBEH18U 3-Wheel Electric as 71-89 fpm.
What is the Gradeability value for Toyota Material Handling 8FBEH18U 3-Wheel Electric?
24 %
The cited OEM source lists Gradeability for Toyota Material Handling 8FBEH18U 3-Wheel Electric as 24 %.
What is the Right-angle stack value for Toyota Material Handling 8FBEH18U 3-Wheel Electric?
76.6 in
The cited OEM source lists Right-angle stack for Toyota Material Handling 8FBEH18U 3-Wheel Electric as 76.6 in.
What is the Electrical system low value for Toyota Material Handling 8FBEH18U 3-Wheel Electric?
36 V
The cited OEM source lists Electrical system low for Toyota Material Handling 8FBEH18U 3-Wheel Electric as 36 V.
What is the Electrical system high value for Toyota Material Handling 8FBEH18U 3-Wheel Electric?
48 V
The cited OEM source lists Electrical system high for Toyota Material Handling 8FBEH18U 3-Wheel Electric as 48 V.
Quick technical specification
Load capacity
3500 lb
Full-load travel speed
9.9-10.2 mph
Full-load lift speed
71-89 fpm
Gradeability
24 %
Right-angle stack
76.6 in
Electrical system low
36 V
Electrical system high
48 V
Expected values / measurement references
Load capacity
3500 lb
Full-load travel speed
9.9-10.2 mph
Full-load lift speed
71-89 fpm
Gradeability
24 %
Right-angle stack
76.6 in
Model-specific OEM reference checks
8FBEH18U 3-Wheel Electric: OEM-published Load capacity reference is 3500 lb. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
8FBEH18U 3-Wheel Electric: OEM-published Full-load travel speed reference is 9.9-10.2 mph. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
8FBEH18U 3-Wheel Electric: OEM-published Full-load lift speed reference is 71-89 fpm. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
8FBEH18U 3-Wheel Electric: OEM-published Gradeability reference is 24 %. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
Diagnostic entry symptoms
Reduced full-load travel speed or slow lift speed
Battery voltage sag / thermal limitation / traction cutback
Steering, brake or mast sensor/limit warning
Measurement and test approach
With load within the data-plate limit, compare full-load travel and lift speed with the published model value; load center and mast configuration change capacity.
On electric models, log system voltage, loaded voltage sag, current and temperatures; on IC models correlate engine/transmission live data with the load event.
Root-cause discrimination
Separate hydraulic pump/valve faults from battery/traction power limitation by testing lift and travel performance independently.
DTC / SPN / FMI context
Interpret traction/inverter/steering faults with battery voltage and temperature at the event.
Post-repair verification
Re-verify travel, lift, steer and brake functions through unloaded and controlled full-load cycles.
Electrical and network
8FBEH18U: Evaluate traction, hydraulic, steering and safety-interlock controllers together.
Sensors, actuators and observation points
8FBEH18U: Traction motor/inverter current and temperature.
8FBEH18U: Battery voltage/SOC and loaded voltage sag.
8FBEH18U: Lift-pump motor current / hydraulic pressure.
8FBEH18U: Mast height/tilt/limit sensors.
8FBEH18U: Steering angle/torque sensor.
8FBEH18U: Brake/seat/park interlock inputs.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.