DAIHATSU Taft 2020–

Variant identity

Model family

Taft

Market/region

Japan

Period/status

2020– • Current sale / production

Platform/generation

LA900

Powertrain/energy/driveline

Kei crossover • Gasoline/turbo/CVT

Research focus: Cam tavan, DNGA.

System map

• A boost fault is not just the turbo; separate leaks, wastegate/VGT, vacuum/electric control, MAF/MAP and exhaust backpressure.
• CVT, D-CVT, IVT and e-CVT are not the same mechanism; identify belt/chain, planetary, motor-generator and hydraulic architecture.

Measurement and verification sequence

1. Capture first/last fault time, engine temperature, load, rpm, speed and system voltage.
2. Verify power/ground and network communication under load; compare commanded value with actual response.
3. Recreate the operating condition after repair and prove the symptom does not return.

Misdiagnosis traps

• Without leak and actuator-command verification, a healthy turbo can be replaced unnecessarily.
• Wrong fluid/procedure or transmission-family identity distorts fault and fitment diagnosis.

Variant-specific system split

• On turbo-petrol architecture, load calculation, boost target/actual, lambda/fuel trim, ignition and knock control are compared in the same event window.
• CVT belt/chain-pulley architecture is not conflated with e-CVT planetary/motor-generator architecture.

Freeze frame / live data

• Freeze frame: first/last fault time, RPM, load, vehicle speed, system voltage, core temperatures and companion DTCs.
• Live data: calculated load, MAP/boost target-actual, throttle angle, lambda/O2, STFT/LTFT, ignition advance and knock retard.
• Driveline: input/output speeds, commanded/actual ratio, clutch/TCC slip, fluid temperature, actuator/solenoid command and adaptations.

Root-cause split

• On lean/misfire/boost complaints, align fuel trim, lambda, ignition retard and boost deviation on one time base to separate air leak, fuel-delivery and ignition causes.
• For CVT ratio faults, identify the architecture first; e-CVT motor-generator power split and belt/chain CVT hydraulic-pulley faults do not share the same diagnostic tree.

What should be verified first?

Model name alone is insufficient. Do not generalize parts fitment, chronic issues or service procedures until production period, market, platform/generation, powertrain, transmission and controller identity are matched.

Model family dossier → · Engine Atlas → · Transmission Atlas → · Recall →