RUSYA - LADA Kalina I / II 2004-2018

Variant identity

Model family

Kalina I / II

Market/region

Russia and Eurasia

Period/status

2004-2018 • Status requires source verification

Platform/generation

VAZ-1118/2192

Powertrain/energy/driveline

B • 1.4/1.6; MT/AT/AMT

Research focus: verify platform/generation, powertrain/energy/driveline and market-specific application identity against manufacturer/source records before applying parts, service procedures or chronic-fault claims.

System map

• HV battery, BMS, isolation, inverter, OBC/DC-DC, 12 V and thermal management are separate evidence chains.

Measurement and verification sequence

1. During READY/charging, monitor pack temperatures, cell delta, isolation, 12 V and charging-power curve together.

Misdiagnosis traps

• Displayed range or one SoH value alone does not prove battery health.

Variant-specific system split

• In an EV, HV battery/BMS, contactor-HVIL/isolation, inverter-motor, OBC/DC-DC, 12 V and cooling circuits are separate evidence branches.
• On AMT/heavy-duty driveline, clutch actuator, gear selector, air/hydraulic supply and engine-torque messages are evaluated synchronously.

Freeze frame / live data

• Freeze frame: first/last fault time, RPM, load, vehicle speed, system voltage, core temperatures and companion DTCs.
• Electrified layer: SOC/SOH where available, cell delta, pack temperatures, HVIL/isolation, contactor permission, DC-DC output and 12 V voltage.
• Driveline: input/output speeds, commanded/actual ratio, clutch/TCC slip, fluid temperature, actuator/solenoid command and adaptations.

Root-cause split

• For READY/charging faults, separate 12 V supply from the HV permission chain first; low 12 V can mimic contactor/HVIL/isolation faults.
• For battery performance, use cell delta, temperature spread and voltage deviation under load/charge instead of one SoH percentage alone.
• For AMT no-shift, verify clutch position, selector position and air/hydraulic supply separately from the engine-torque message.

What should be verified first?

Model name alone is insufficient. Do not generalize parts fitment, chronic issues or service procedures until production period, market, platform/generation, powertrain, transmission and controller identity are matched.

Model family dossier → · Engine Atlas → · Transmission Atlas → · Recall →