OTODÜNYAMAUTOMOTIVE KNOWLEDGE CENTER
What is the fuel capacity of Caterpillar 395 Front Shovel OEM published configuration?
1220 L
The cited OEM source lists Fuel tank for Caterpillar 395 Front Shovel OEM published configuration as 1220 L.
SOURCED MODEL TECHNICAL DATA
Caterpillar 395 Front Shovel OEM published configuration Oil, Fluid Capacities & Technical Data
Caterpillar 395 Front Shovel OEM published configuration — Fuel tank: 1220 L · Cooling system: 71 L · Engine oil: 67 L Sources, symptoms, measurements and verification on one page.
Quick answers
What is the coolant capacity of Caterpillar 395 Front Shovel OEM published configuration?
71 L
The cited OEM source lists Cooling system for Caterpillar 395 Front Shovel OEM published configuration as 71 L.
How much engine oil does Caterpillar 395 Front Shovel OEM published configuration take?
67 L
The cited OEM source lists Engine oil for Caterpillar 395 Front Shovel OEM published configuration as 67 L.
What is the hydraulic capacity or reference value for Caterpillar 395 Front Shovel OEM published configuration?
740 L
The cited OEM source lists Hydraulic system for Caterpillar 395 Front Shovel OEM published configuration as 740 L.
What is the hydraulic capacity or reference value for Caterpillar 395 Front Shovel OEM published configuration?
432 L
The cited OEM source lists Hydraulic tank for Caterpillar 395 Front Shovel OEM published configuration as 432 L.
What is the DEF / AdBlue capacity of Caterpillar 395 Front Shovel OEM published configuration?
80 L
The cited OEM source lists DEF for Caterpillar 395 Front Shovel OEM published configuration as 80 L.
What is the hydraulic capacity or reference value for Caterpillar 395 Front Shovel OEM published configuration?
1008 L/min
The cited OEM source lists Main hydraulic flow for Caterpillar 395 Front Shovel OEM published configuration as 1008 L/min.
What is the hydraulic capacity or reference value for Caterpillar 395 Front Shovel OEM published configuration?
32000 kPa
The cited OEM source lists Implement hydraulic pressure for Caterpillar 395 Front Shovel OEM published configuration as 32000 kPa.
Quick technical specification
Main hydraulic flow
1008 L/min
Implement hydraulic pressure
32000 kPa
Swing torque
362 kNm
Oil, fluids, energy and capacities
Fuel tank
1220 L
Cooling system
71 L
Engine oil
67 L
Hydraulic system
740 L
Hydraulic tank
432 L
DEF
80 L
Expected values / measurement references
Main hydraulic flow
1008 L/min
Implement hydraulic pressure
32000 kPa
Swing torque
362 kNm
Fuel tank
1220 L
Cooling system
71 L
Model-specific OEM reference checks
395 Front Shovel OEM published configuration: OEM-published Main hydraulic flow reference is 1008 L/min. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
395 Front Shovel OEM published configuration: OEM-published Implement hydraulic pressure reference is 32000 kPa. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
395 Front Shovel OEM published configuration: OEM-published Swing torque reference is 362 kNm. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
395 Front Shovel OEM published configuration: OEM-published Fuel tank reference is 1220 L. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
Diagnostic entry symptoms
Slow hydraulic functions or stalling under load
High oil temperature, cavitation noise or erratic movement
Asymmetric travel/swing power
Measurement and test approach
Measure main-pump flow and service-port pressure against the manufacturer-published maximum flow/pressure reference at the specified oil temperature and test condition.
Correlate requested pump displacement, engine load, pilot pressure and actuator speed during the same function event.
Root-cause discrimination
Differentiate pump wear from main-valve leakage/setting faults by evaluating stall/deadhead testing with flow and case-drain findings; use OEM procedure for safe limits.
DTC / SPN / FMI context
On electronically controlled pump/valve machines, do not condemn a sensor/solenoid without physical pressure/flow confirmation.
Post-repair verification
Recheck cycle time, pressure/flow, drift and leakage behavior cold and at operating temperature.
Maintenance / service reference
395 Front Shovel: exact maintenance interval, fluid-change quantity and torque procedure must be verified from OEM maintenance/service information matched to model year/VIN/serial number; unpublished service thresholds are not invented in this record.
Electrical and network
395 Front Shovel: Evaluate engine ECU, machine controller, pump/valve control and CAN/J1939 network together.
Sensors, actuators and observation points
395 Front Shovel: Main-pump pressure/flow control.
395 Front Shovel: Pump displacement / swashplate command.
395 Front Shovel: Pilot-pressure sensor.
395 Front Shovel: Main-control-valve spool/solenoid commands.
395 Front Shovel: Travel/swing pressure and speed feedback.
395 Front Shovel: Hydraulic-oil temperature.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.