OTODÜNYAMAUTOMOTIVE KNOWLEDGE CENTER
What is the Rated load value for Toyota Material Handling 50-8FGC55U Large IC Cushion?
12000 lb
The cited OEM source lists Rated load for Toyota Material Handling 50-8FGC55U Large IC Cushion as 12000 lb.
SOURCED MODEL TECHNICAL DATA
Toyota Material Handling 50-8FGC55U Large IC Cushion Technical Specs, Power/Torque & Measurements
Toyota Material Handling 50-8FGC55U Large IC Cushion — Rated load: 12000 lb · Engine displacement: 3.685 L · Rated engine power: 88 hp Sources, symptoms, measurements and verification on one page.
Quick answers
What is the engine displacement of Toyota Material Handling 50-8FGC55U Large IC Cushion?
3.685 L
The cited OEM source lists Engine displacement for Toyota Material Handling 50-8FGC55U Large IC Cushion as 3.685 L.
What is the power rating of Toyota Material Handling 50-8FGC55U Large IC Cushion?
88 hp
The cited OEM source lists Rated engine power for Toyota Material Handling 50-8FGC55U Large IC Cushion as 88 hp.
What is the torque rating of Toyota Material Handling 50-8FGC55U Large IC Cushion?
288 Nm
The cited OEM source lists Rated torque for Toyota Material Handling 50-8FGC55U Large IC Cushion as 288 Nm.
What is the hydraulic capacity or reference value for Toyota Material Handling 50-8FGC55U Large IC Cushion?
2630 psi
The cited OEM source lists Hydraulic max pressure for Toyota Material Handling 50-8FGC55U Large IC Cushion as 2630 psi.
What is the hydraulic capacity or reference value for Toyota Material Handling 50-8FGC55U Large IC Cushion?
128 L/min
The cited OEM source lists Hydraulic max flow for Toyota Material Handling 50-8FGC55U Large IC Cushion as 128 L/min.
What is the Battery voltage value for Toyota Material Handling 50-8FGC55U Large IC Cushion?
12 V
The cited OEM source lists Battery voltage for Toyota Material Handling 50-8FGC55U Large IC Cushion as 12 V.
Quick technical specification
Rated load
12000 lb
Engine displacement
3.685 L
Rated engine power
88 hp
Rated torque
288 Nm
Hydraulic max pressure
2630 psi
Hydraulic max flow
128 L/min
Battery voltage
12 V
Expected values / measurement references
Rated load
12000 lb
Engine displacement
3.685 L
Rated engine power
88 hp
Rated torque
288 Nm
Hydraulic max pressure
2630 psi
Hydraulic max flow
128 L/min
Battery voltage
12 V
Model-specific OEM reference checks
50-8FGC55U Large IC Cushion: published Rated load reference is 12000 lb. Measurements on the same variant/year scope should use this value as the reference.
50-8FGC55U Large IC Cushion: published Engine displacement reference is 3.685 L. Measurements on the same variant/year scope should use this value as the reference.
50-8FGC55U Large IC Cushion: published Rated engine power reference is 88 hp. Measurements on the same variant/year scope should use this value as the reference.
50-8FGC55U Large IC Cushion: published Rated torque reference is 288 Nm. Measurements on the same variant/year scope should use this value as the reference.
50-8FGC55U Large IC Cushion: published Hydraulic max pressure reference is 2630 psi. Measurements on the same variant/year scope should use this value as the reference.
50-8FGC55U Large IC Cushion: published Hydraulic max flow reference is 128 L/min. Measurements on the same variant/year scope should use this value as the reference.
Diagnostic entry symptoms
Slow lifting under load
Lift or tilt function cuts out
Loss of traction power
Function inhibited by SAS/OPSS
Measurement and test approach
Measure main hydraulic pressure at the test port against the manufacturer limit.
Measure pump flow under load and compare it with cylinder cycle time.
Measure battery/supply voltage drop separately under lift and traction load.
Root-cause discrimination
Separate pump, relief, valve and cylinder internal leakage using pressure, flow and cycle-time together.
Separate a safety-interlock inhibit from a genuine hydraulic or traction fault.
DTC / SPN / FMI context
Record controller event codes, SAS/OPSS interlock state and related sensor inputs during the same event.
Post-repair verification
At rated load, lift/lower, tilt and traction functions must operate continuously and the event must not return.
Electrical and network
Power system, traction/engine controller, hydraulic controller and SAS/OPSS safety inputs are evaluated together.
Sensors, actuators and observation points
50-8FGC55U Large IC Cushion: Lift/tilt command and valve current.
50-8FGC55U Large IC Cushion: Hydraulic pressure and pump flow.
50-8FGC55U Large IC Cushion: Drive-motor/engine speed and load.
50-8FGC55U Large IC Cushion: Seat/OPSS/SAS safety inputs.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.