OTODÜNYAMAUTOMOTIVE KNOWLEDGE CENTER
What is the engine displacement of Yamaha Ténéré 700 OEM specification?
689 cc
The cited OEM source lists Engine displacement for Yamaha Ténéré 700 OEM specification as 689 cc.
SOURCED MODEL TECHNICAL DATA
Yamaha Ténéré 700 OEM specification Technical Specs, Power/Torque & Measurements
Yamaha Ténéré 700 OEM specification — Engine displacement: 689 cc · Power: 54 kW · Torque: 68 Nm Sources, symptoms, measurements and verification on one page.
Quick answers
What is the power rating of Yamaha Ténéré 700 OEM specification?
54 kW
The cited OEM source lists Power for Yamaha Ténéré 700 OEM specification as 54 kW.
What is the torque rating of Yamaha Ténéré 700 OEM specification?
68 Nm
The cited OEM source lists Torque for Yamaha Ténéré 700 OEM specification as 68 Nm.
What is the Bore value for Yamaha Ténéré 700 OEM specification?
80 mm
The cited OEM source lists Bore for Yamaha Ténéré 700 OEM specification as 80 mm.
What is the Stroke value for Yamaha Ténéré 700 OEM specification?
68.6 mm
The cited OEM source lists Stroke for Yamaha Ténéré 700 OEM specification as 68.6 mm.
What is the Compression ratio value for Yamaha Ténéré 700 OEM specification?
11.5 :1
The cited OEM source lists Compression ratio for Yamaha Ténéré 700 OEM specification as 11.5 :1.
What is the Transmission speeds value for Yamaha Ténéré 700 OEM specification?
6
The cited OEM source lists Transmission speeds for Yamaha Ténéré 700 OEM specification as 6.
What is the power rating of Yamaha Ténéré 700 OEM specification?
73.4 PS
The cited OEM source lists Power for Yamaha Ténéré 700 OEM specification as 73.4 PS.
Quick technical specification
Engine displacement
689 cc
Power
54 kW
Torque
68 Nm
Bore
80 mm
Stroke
68.6 mm
Compression ratio
11.5 :1
Transmission speeds
6
Power
73.4 PS
Fuel consumption
4.3 L/100km
Expected values / measurement references
Engine displacement
689 cc
Power
54 kW
Torque
68 Nm
Model-specific OEM reference checks
Ténéré 700 OEM specification: OEM-published Engine displacement reference is 689 cc. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
Ténéré 700 OEM specification: OEM-published Power reference is 54 kW. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
Ténéré 700 OEM specification: OEM-published Torque reference is 68 Nm. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
Ténéré 700 OEM specification: OEM-published Bore reference is 80 mm. Measurement/evaluation on the same configuration should use this published value as context; obtain any service tolerance from the VIN/serial-matched OEM procedure.
Diagnostic entry symptoms
Hard starting, unstable idle or weak throttle response
DCT/shift issue or traction-control/ABS warning
Weak charging system or elevated temperature
Measurement and test approach
Log PGM-FI data, throttle position, MAP, lambda, coolant temperature and, where fitted, DCT input/output speeds with the event.
Measure battery rest/load/charging voltage and ground drop; use the service manual for exact thresholds.
Root-cause discrimination
Separate fuel/ignition faults from DCT/traction intervention by reviewing torque request and cut/limit states together.
DTC / SPN / FMI context
Evaluate MIL/ABS/DCT codes with sub-code and freeze-frame; do not skip wiring/connector physical inspection.
Post-repair verification
Repeat scan after cold start, full warm-up, low/high-speed shifts and controlled ABS/TCS self-check.
Maintenance / service reference
Ténéré 700: exact maintenance interval, fluid-change quantity and torque procedure must be verified from OEM maintenance/service information matched to model year/VIN/serial number; unpublished service thresholds are not invented in this record.
Electrical and network
Ténéré 700: Evaluate engine/PGM-FI ECU, ABS, cluster and DCT/IMU network where fitted.
Sensors, actuators and observation points
Ténéré 700: TPS/APS and MAP.
Ténéré 700: Lambda/O2 and injector command.
Ténéré 700: Engine coolant temperature.
Ténéré 700: Crank/cam synchronization.
Ténéré 700: ABS wheel-speed sensors / IMU where fitted.
Ténéré 700: DCT input/output speeds and clutch command where fitted.
OEM primary sources
Continue with related models and classes
Technical data centers
Evidence boundary
Only exact values published by the cited source are shown numerically. Pins, torque, pressure, resistance or service thresholds not publicly published are not invented; use the VIN/model-year/calibration-matched OEM service procedure.
Sources & freshness
Sources & freshness
Exact technical values, prices and failure rates are not invented without verified vehicle/manufacturer evidence.